Container Gardening: Unique Watering and Fertilizing Needs

Container gardening has unique watering and fertilizing needs because the containers are closed systems.  The needs of moderate or larger installations are best met with simple drip irrigation and fertilization systems which require no electricity.  Hiding the feeder lines for aesthetic reasons is one of the key features of the containers I design for DeepStream Designs.

While most plants do best with a consistent soil moisture content, many need to dry out between water applications.  Of course, some plants require special over or under watering applications.  A multi-valve multi-line drip system can use automatic timers to achieve both effortlessly.

drip irrigation control manifold

drip irrigation control manifold

Here is a picture of my manifold setup, which along with the drip irrigation on 4 circuits, was installed in a single  afternoon

To simplify your watering, it is best not to mix plants that may need different types of watering, fertilizing or soil in the same container.

While this concept can also be extended to root depth, in larger planters it can actually work quite well as trees or bushes with deep roots can benefit from the needs of flowers with shallow roots that dry out more quickly to be watered several times a day with a  topical water spray which can augment a deeper root drip application line fed by a line on a different timer.

Generally, I run at least two 1/2″ main lines to feed perimeter planters:  one for the deep-rooted plants watered by drip irrigation soaker hoses with emitters on 6″ spacings, and another with sprayer and/or misters that either hang from taller trees or bushes or stand on spikes.

In every case, I use in-line micro-valves on every 1/4″ feeder line from the 1/2″ main line to tailor the water delivery of each line to the planter, as the micro climates of each planter may vary considerably depending on exposure to sun and wind.

Delivering micro-doses of fertilizers on a consistent basis precludes the trough and peak delivery of single monthly doses of liquid fertilizers or the irregular dosing provided by slow-release coated dry fertilizers that depend on rainfall to dissolve.  Plants do better with this type of consistent feeding.

An advantage of installing different main line circuits for different types of plants is that a fertilizer injector system can be installed upstream of the valves.  Running one valve at a time, you can meet the needs of different plant types with different types and proportions of fertilizers with just the flip of a switch.

A visit to Dripworks’ catalog will give you a good overview of the types of products available that make this very easy, even systems that work on elevated rain barrels.

Reservoir Planter Liner

Self Watering Reservoir Planter Liner


Reservoir planters  and planter liners are another form of irrigation that will work when you have plantings with similar root structure and no running water.  These system use a bottom up water supply so if you have different plants, some with shallow roots that need more water and others with deep roots that need less they do not work as well as the top down found in nature.


Landscape Architect grade plastic reservoir garden planter available from DeepStream Designs

Landscape Architect grade plastic reservoir garden planter available from DeepStream Designs

About DeepStream

DeepStream handcrafts aesthetically-pleasing weatherproof designs which minimize environmental impact through timeless design, material selection, and rugged construction using the principles of Sustainable Design. Lifetime-Structural-Warranty, all parts replaceable and recyclable. Purchases support the non-profit Trees for the Future
This entry was posted in container gardening, garden planters, Gardening, Green Roofs, Issues & Solutions, planters, sustainable design and tagged , , , , . Bookmark the permalink.